Request Copy of Birth Certificate

Legislation passed in 2013 allows a customer to obtain certified copies of Virginia birth certificate at a DMV Customer Service Center.

Toggle_Expanded Helpful Information About Birth Certificates

notes20px       There are potentially four names involved in the transaction:

1.The Requester - the person at the counter making the request.

2.The Registrant - the person named on the birth certificate.

3.The Mother - the registrant's mother named on the birth certificate. Note: If a mother is listed on the birth certificate, the mother's maiden name - (her name at the time of her birth) must be provided by the customer requester.

4.The Father - the registrant's father named on the birth certificate (if available).

notes20px       The Requester must be a DMV customer.  If they are not, you must create a customer using SPECUS before beginning the transaction. Button_RequiredField  You must select Vital Record Certified Copy (VR) as the reason for the creation of the customer.

Toggle_Expanded Overview of How the Transaction Works

The Vital Record transaction is used to search for a record of a Virginia customer's birth and (if a record is found) produce a birth certificate.

Requesting a certified copy of a birth certificate is a multi-step process spanning two transactions -- potentially three if additional copies are needed -- as shown below. Note: During the multi-step process, it is preferable to NOT save and recall.

VDHFlow

DVRINI

Requester - The transaction begins with entering the Requester information.  The name and address information is automatically populated with information from the DMV customer record.  Additional information to be added is taken from the Requester's application, to include: the Requester's relationship to the Registrant and the reason for the request.

Payment - After completing that Requester's Information section, you must collect payment.  This transaction is unique from other DMV transactions because the customer is paying for the search, not for the certificate.

Button_RequiredField   Once payment is collected, the transaction should NOT be voided.  Any issues after that time must be resolved by the Requester contacting the Department of Health.

DVRRBC

Registrant - The transaction requires the CSR to enter the birth record information, to include the Registrant, mother, and/or father, depending on the scenario.

Search - After entering the Requester information, collecting payment, and entering the Registrant information, you then initiate a search for the birth record.  During this step, DMV will receive a message indicating a match is found or is not found. If the record is not found or not matched, you may need to confirm with the Requester that the information they provided is correct. If any information they provided is not correct, the CSR needs to ensure the requester has updated their application, correct the necessary fields, and perform another search by re-clicking Button_SendToVDH .

Print 1 - Once a record match has been received by the system and all information returned from VDH has been reviewed, you will click the Process button to print.  After retrieving the Birth Certificate from the printer, you must confirm the document number in mySelect.  This information is critical in maintaining an accurate accounting of this inventory.

Button_RequiredField   Birth Certificate paper is a controlled asset, so care must be taken to ensure proper handling.  If you have any questions about handling procedures, please consult your Manager.

DVRADL

This transaction is launched at the end of DVRRBC, after printing the first certificate.  This transaction is an option that may be selected by the CSR if the Requester has indicated they need additional copies. The first payment transaction was for the search of VDH records.  If additional copies are requested, the CSR will enter the number of certificates requested and collect payment.

To process a request for a birth certificate

1.If not already open, Open the Customer Console using the customer's number or name.

From the Console Go To

Steps to Follow

Alerts Grid

     If the customer is required to prove legal presence and is eligible to use Vital Records the following alert will display in the Alerts grid.

    CUIDNM   Legal Presence Required - VDH/EVVE Available

1.Clicking the Button_GreenRightArrow button will launch the Maintain Proof of Legal Presence/Residency transaction form.

Quick Navigation

     Click the Quick Navigation button on the menu bar in the Customer Console.

1.Select VDH Request, the VDH Request (Step 1of 2) - phase 2 transaction form opens.

      Note: This is the preferred method to access the VDH Request (Step 1of 2) - phase 2 transaction form

2.Continue with step 2.

Transaction Menu

1.Click the Transaction Menu button in the Main Menu Bar.

2.Navigate to Customer Transactions>Customer>VDH Request (Step 1 of 2) (DVRINI).

3.Click the Inquire Button_Inquire button.

    Note: This is NOT the preferred method to access the VDH Request (Step 1of 2) - phase 2 transaction form. There may be missing important information that will cause a No Match with Vital Records.

4.Continue with step 2.

Command Line

1.   Enter DVRINI, then press the Enter key.

2.   The VDH Request (Step 1of 2) - phase 2 transaction form opens.

3.   Continue with step 2.

2.View and respond to the Requester Information message box.

VDH_Requester_Info_MSG

        If the No button is clicked, the the transaction is closed and the Customer Console appears.

        If the Yes button is clicked, continue with Step 1: Enter Requester Info & Payment (DVRINI)

 

Step 1: Enter Requester Info & Payment (DVRINI)

3.From the Requester Relationship drop-down, select the Requester's relationship to the Registrant (name of birth certificate) as found on the Requester's application (DL-82). Note: The Requester's relationship to the Registrant must match the requester's gender; i.e. if the requester's gender is male, then the relationship cannot be sister, daughter or mother.

Button_RequiredField  If the Relationship is "Self" and Legal Presence is not already on the customer file, then Legal Presence will automatically be updated (if a match is found).

4.From the Reason for Request drop-down, select the reason for the request as found on the Requester's application (DL-82).
5.Click the Inquire button. When a valid record is retrieved in the system, the following new sections will be displayed.

Toggle_Expanded Click for descriptions of the sections

Section

Information Displayed

Requester Information

This section is where you provide additional information about the Requester which is specific to this vital record transaction.

 

Button_RequiredField  Phone Number and Email are optional; however, you must select at least one Primary ID or two Secondary IDs.

Click to view full size
Click to view full size

Requester Mailing Address

This optional section is where you can modify the Requester's Mailing Address for purposes of this vital record transaction only.

 

ico_note  Modifications to the Mailing Address here do not update the Requester's DMV customer record.

 

Click to view full size
Click to view full size

6.From the appropriate drop-downs, select the ID presented.

7.Click the Process button and Collect the customer's payment and process.

ico_note  If the reason for this request is for Veteran's Benefits, the fee due will be $0.00.

8.Enter the payment information.

9.Click the Process button.  The payment is processed and the Receipt Details dialog appears.

10.Click the Print Receipt button.  The receipt for payment is sent to the printer.  The Transaction Details dialog reappears displaying miscellaneous details about the transaction.

11.Click the Close button.  This closes the Transaction Details dialog. Please wait for Step 2 to display.

Step 2: Enter Registrant, Search and Print 1 (DVRRBC)

After processing the payment, the VDH Request (DVRRBC) Step 2 of 2 transaction will automatically appear.  All Requester Information previously entered is automatically populated and may no longer be edited.

 

    ico_note If the requester's mailing address needs to be modified and was not done in Step 1, you may make those modifications in the

       Requester's Mailing Address section of Step 2. The modifications are for purposes of this vital record transaction only and

      does not update the Requester's DMV customer record.

Click to view full size
Click to view full size

 

 

Now you are entering the Registrant (the person named on the birth certificate) information.

12.  Enter the Registrant information.  All required information is indicated by the Button_RequiredField icon.

Click to view full size
Click to view full size

Button_RequiredField  Before proceeding to the next step, be sure all the information entered is correct.  Once you click the Search VDH button, the customer's fee is committed and cannot be refunded.

Button_RequiredField Mother's Maiden Name is her last name at the time of her birth.

13.  Click the Send to VDH button.  The search request is sent to VDH, VDH searches their records then sends back a response.  The next step depends on the response received from VDH.

If VDH response is ....

You may ...

Match

 

 

Print the birth certificate

- or -

Complete Transaction Without Printing

Possible Match or

No Match

Modify Information and Search Again

- or -

Complete Transaction Without Printing

No Print

No Print

Toggle_Expanded Scenario: Match - Print the Birth Certificate

  If a Match is found, the system displays a message advising you to review the  information with the  Requester, then click Process to print.

VDH_Phase2_MatchFoundMSG

Review Information with Requester

1.Scroll down to the Results Returned from VDH section before clicking the Process button.  Notice the Status value is PRINT in the Results Returned From VDH section.

2.Review the information with the Requester to confirm this is the right birth record, and the requester is eligible to receive the certificate.

3.Click the Process Button_Process button.

Verify VDH Results Review and Print

After reviewing the information with the Requester, you must confirm you've done so, as well as specify whether you now want the Birth Certificate to print. Management Authorization must also be entered in order to continue.

     The VDH Results Review dialog appears. The Mother/Parent1 and Father/Parent2 names populate in the appropriate fields.

Click to view full size
Click to view full size

1.Click the Confirm check box, indicating you have reviewed the information with the Requester.

2.Click the Yes radio button to indicate you want to print the birth certificate.  

      Click the No  radio button if you do not want to print the birth certificate or it is discovered the requester is not eligible to receive it. Click the drop down and select a reason why the certificate was not printed. The cover sheet is sent to the printer after steps 3 and 4 are completed.

3.   Have a manager or authorized designee enter their User Name and Password.

4.   Click the OK button. 

Specify Certificate Type

After verifying, you must now indicate which Certificate Type to print.  The Certificate Print Type dialog appears displaying the types of certificates which can be printed, depending on the scenario.

Click to view full size
Click to view full size

1.Select the certificate type the Requester wants.

2.Click the OK button.  mySelect sends the document to the printer loaded with the Vital Record (Birth Certificate) inventory paper.

Record Inventory Control Number

The VDH Issue Secure Paper dialog appears.

Note: If inventory has not been assigned, See Vital Record Paper Inventory

Click to view full size
Click to view full size

1.Retrieve the document from the printer.

2.In the Item Number field, enter the document number.

3.Click the Update Button_Update button.  This assigns the document number to that Requester, which is then provided to VDH.   mySelect displays a message advising the vital record was issued.                  

Button_RequiredField If the item number is incorrectly entered, click the Button_Inventory_VDH button then click External Agencies>VA Dept of Health>Vital Record Paper, to verify the item number.

4.If there were printer errors, you may reprint the birth certificate by clicking the Button_Reprint_VDH button. Note: The Reprint button will not be active if a Vital Record Item Number is assigned. Once the Issue Secure Paper inventory window is closed, reprints are no longer available.

5.For printer errors discovered prior to closing this window, you may click VOID next to the Item Number to void the Vital Record Security paper inventory if a printer malfunction occurred. i.e. smudged print. Remember to follow the procedures for voiding and scanning VDH documents.

                                           

Click to view full size
Click to view full size

     

6.Click the Close Button_Close button. An attention message pops up and must be answered before proceeding. Click the Yes button to continue.

                                   

Click to view full size
Click to view full size

7.   The Transaction Details dialog appears displaying the miscellaneous details about the transaction.

8.   Click the Close Button_Close button.

 

Additional Copies Requested?

mySelect now displays a dialog asking whether the Requester wants additional copies.

Click to view full size
Click to view full size

Button_RequiredField  Additional copies require an additional payment transaction be processed.

Button_RequiredField  Clicking No completes the transaction.  After that point the only way to get additional copies is to process the transaction again.

1.   If no additional copies are requested, Click the No button.  To print additional copies, click the Yes button.   See Additional Copies.

Toggle_Expanded Scenario: Possible Match - Modify Information and Search Again

If a Possible Match or No Match response is returned, this means the information submitted does not match the information on the birth record.

1.Scroll down to the Results Returned from VDH section before clicking the Process button.  If there is information in the Status Reason field, this tells you which piece of information does not match the birth record.  If there is not a value, then more than one piece of information is incorrect.

2.Review the information with the Requester.

3.If the information was keyed in error, go to the field where the information is entered and correct it.  Also follow the established business process for making a notation on the Requester's paper application.

4.Click the Send to VDH button again.

Toggle_Expanded Scenario: No Print - Complete Transaction

If a No Print response is returned, the system displays a message advising the birth certificate cannot be printed.  This type of response indicates the birth certificate information is not available or is not printable.

1.Click the OK button.  Notice the Status Reason = CERTIFICATE CANNOT BE PRINTED AT DMV.

2.Click the Process Button_Process button.  The cover sheet is sent to the printer. The Transaction Details dialog appears displaying the miscellaneous details about the transaction.

3.Click the Close Button_Close button.

4.Follow the business process for referring the Requester to VDH.

Toggle_Expanded Scenario: Match - Does Not Wish to Print

After performing a Search of VDH and a MATCH has been found, if you do not want to print the birth certificate or it is discovered the requester is not eligible to receive it, do the following to complete the transaction.

1.Click the Process Button_Process button.  mySelect displays the VDH Results Review window.

2.Click the Confirm check box, indicating you have reviewed the information with the Requester.

3.Click the No radio button if you do not want to print the birth certificate or it is discovered the requester is not eligible to receive it.

4.Have a manager or authorized designee enter their User Name and Password in order to continue.

5.Click the OK button.  The cover sheet is sent to the printer. The Transaction Details dialog appears displaying the miscellaneous details about the transaction.

6.Click the Close button to end the transaction.

 

Printing Additional Copies

The ability to print additional copies is introduced after printing the first birth certificate and before the initial transaction is completed. This functionality is not available standalone, although it is introduced as a new transaction - DVRADL.  It requires at least one copy has already been paid for and printed.

After clicking the Yes button when asked whether additional copies are requested by the Requester, the DVRADL transaction appears.

Step 1: Indicate # of Copies

1.In the Number of Copies field enter the number of copies.

                   

Click to view full size
Click to view full size

2.Click the Process Button_Process button.  The Transaction Details dialog appears displaying the amount due.

Step 2: Pay & Print

3.Enter the payment information.

4.Click the Process Button_Process button.  The birth certificate(s) is sent to the printer.  The VDH Vital Record Document Number dialog appears.

Step 3: Record Document Numbers

5.After retrieving the document(s) from the printer, enter each Vital Record Document number in the Item Number field. Enter one document number per open line.

                                                     

Click to view full size
Click to view full size

6.Click the Update Button_Update button. The Item Status changes to Processed for each item.

7.If there were printer errors, you may reprint the birth certificate by clicking the Button_Reprint_VDH button. Note: The Reprint button will not be active if a Vital Record Item Number is assigned. Once the Issue Secure Paper inventory window is closed, reprints are no longer available.

8.For printer errors and/or Inventory Item Number entry errors, you may click VOID next to the item number.

                                                       

Click to view full size
Click to view full size

9.Click the Issue Secure Paper window Close Button_Close button. The Receipt Details dialog then appears. Print the receipt if requested.

10.Click the Close Button_Close button.  The Transaction Details dialog appears displaying miscellaneous information about the transaction.

11.Click the Close Button_Close button.  The transaction is now complete.

See also

Voiding a VDH Transaction

     For more information, see the Customer Service Center Operations Manual VDH-1.00 section.

Topic Last Edited: 7/17/2015